Power Electronics IEEE Projects

Why Power Electronics Projects?

Power electronics is one of the minds sharpening technology which is designing with the semiconductor devices like rectifiers, switches, transistors etc. The domain which is applied in between the source and application (load) devices, for Converting and inverting the range of power (voltage*current) which placed in between that medium for obtaining run time output. Simulation part will be executed with the help of Software called as Matlab. The field (Power electronics) is a place for students those who are ready to chase century in the innovative world. Chargers for laptops and mobile phone, solar panel, UPS, Electric charger bike are the some real time examples for this ingenious domain.

Why Power Electronics Projects at Uniq?

It is a time say lucky peoples those who all are join with this innovation and they are EEE, ECE, E&I, ICE students. Our techies trained the students not only regarding their desire technically. Training offered as practical demonstration as like a MNC’s. The development of our techies is derived from latest IEEE standard. The students can create a project within an allowance. Give your arrival to our foremost Project Centre located at Coimbatore and makes all your thoughts comes true.

Power Electronics Projects

( Powered by UNIQ Technologies )

 

I. POWER ELECTRONICS based SOLAR ENERGY

 

  1. Leakage Current Suppression of Three-Phase Flying Capacitor PV Inverter with New Carrier Modulation and Logic Function. (IEEE2018)
  2. Modified Single-Phase Single-Stage Grid-Tied Flying Inductor Inverter with MPPT and Suppressed Leakage Current. (IEEE2018)
  3. High-Efficiency Two-Stage Three-Level Grid-Connected Photovoltaic Inverter. (IEEE2018)
  4. A Buck and Boost Based Grid Connected PV Inverter Maximizing Power Yield from Two PV Arrays in Mismatched Environmental Conditions. (IEEE2018)
  5. Integrated DC-DC Converter Based Grid-Connected Transformer less Photovoltaic Inverter with Extended Input Voltage Range. (IEEE2018)
  6. Novel Control Method for Multimodule PV Microinverter With Multiple Functions. (IEEE2018)

 

II. POWER ELECTRONICS based WIND ENERGY

 

  1. Analysis of a High-Power, Resonant DC-DC Converter for DC Wind Turbines. (IEEE2018)
  2. A Hybrid Resonant ZVZCS Three-Level Converter for MVDC-Connected Offshore Wind Power Collection Systems. (IEEE2018)

 

III. POWER ELECTRONICS based HYBRID SYSTEMS & ENERGY STORAGE

 

  1. Soft-switched Non-Isolated High Step-up Three-port DC-DC converter for Hybrid Energy Systems. (IEEE2018)
  2. Stability Improvement of a Multimachine Power System Connected With a Large-Scale Hybrid Wind-Photovoltaic Farm Using a Supercapacitor. (IEEE2018)
  3. Frequency Division Based Coordinated Control of Three-Port Converter Interfaced Hybrid Energy Storage Systems in Autonomous DC Microgrids. (IEEE2018)
  4. Partially-Isolated Single-Magnetic Multi-Port Converter Based on Integration of Series-Resonant Converter and Bidirectional PWM Converter. (IEEE2018)
  5. A Uniform Control Strategy for the Interlinking Converter in Hierarchical Controlled Hybrid AC/DC Microgrids. (IEEE2018)
  6. Supervisory Power Quality Control Scheme for a Grid-Off Microgrid. (IEEE2018)
  7. A Battery/Ultracapacitor Hybrid Energy Storage System for Implementing the Power Management of Virtual Synchronous Generators. (IEEE2018)
  8. Instantaneous Symmetrical Component Theory based Parallel Grid Side Converter Control Strategy for Microgrid Power Management. (IEEE2018)

 

IV. POWER ELECTRONICS based INVERTER AND MULTILEVEL INVERTERS

 

  1. A Single-Phase Single-Stage Switched-Boost Inverter With Four Switches Decentralized Control for Fully Modular Input-Series Output-Parallel (ISOP) Inverter System Based on the Active Power Inverse Droop Method. (IEEE2018)
  2. Multistage and Multilevel Power Electronic Converter-Based Power Supply for Plasma DBD Devices. (IEEE2018)
  3. An Isolated Multi-Input ZCS DC-DC Front-End-Converter Based Multilevel Inverter for the Integration of Renewable Energy Sources. (IEEE2018)
  4. A Novel Step-Up Single Source Multilevel Inverter: Topology, Operating Principle and Modulation. (IEEE2018)
  5. Multi-Input Switched-Capacitor Multilevel Inverter for High-Frequency AC Power Distribution. (IEEE2018)

 

V. POWER ELECTRONICS based WIRELESS POWER TRANSFER

 

  1. A New Controller for Bidirectional Wireless Power Transfer Systems. (IEEE2018)
  2. High Power Density Z-Source Resonant Wireless Charger with Line Frequency Sinusoidal Charging. (IEEE2018)

 

VI. POWER ELECTRONICS based DRIVES

 

  1. Quasi-Z-Source Indirect Matrix Converter Fed Induction Motor Drive for Flow Control of Dye in Paper Mill. (IEEE2018)
  2. DC-Link Capacitor-Current Ripple Reduction in DPWM-Based Back-to-Back Converters. (IEEE2018)
  3. Power Factor Correction in Modified SEPIC Converter fed Switched Reluctance Motor Drive. (IEEE2018)
  4. Improved Finite Control-Set Model-Based Direct Power Control of BLDC Motor with Reduced Torque Ripple. (IEEE2018)
  5. High-Precision Sensorless Drive for High-Speed BLDC Motors Based on the Virtual Third Harmonic Back-EMF. (IEEE2018)

 

VII. POWER ELECTRONICS based ELECTRIC VEHICLE

 

  1. On an Electric Scooter With G2V/V2H/V2G and Energy Harvesting Functions. (IEEE2018)
  2. PV Battery Charger Using an L3C Resonant Converter for Electric Vehicle Applications. (IEEE2018)
  3. High-Efficiency Bridgeless Single-Power-Conversion Battery Charger for Light Electric Vehicles. (IEEE2018)
  4. Implementation of a Grid-Integrated PV-Battery System for Residential and Electrical Vehicle Applications. (IEEE2018)

 

VIII. POWER ELECTRONICS based BI-DIRECTIONAL CONVERTER

 

  1. Improved Modulation Strategy Using Dual Phase Shift Modulation for Active Commutated Current-Fed Dual Active Bridge. (IEEE2018)
  2. A Common Ground Switched-Quasi-Z-Source Bidirectional DC-DC Converter With Wide-Voltage-Gain Range for EVs With Hybrid Energy Sources. (IEEE2018)

 

IX. POWER ELECTRONICS based CUK AND RESONANT CONVERTER

 

  1. Modified High-Efficiency LLC Converters With Two Split Resonant Branches for Wide Input-Voltage Range Applications. (IEEE2018)
  2. A Voltage Quadrupler Rectifier Based Pulse–Width–Modulated LLC Converter with Wide Output Range. (IEEE2018)
  3. Dynamic Modeling and Controller Design of Dual-Mode Cuk Inverter in Grid-Connected PV/TE Applications. (IEEE2018)
  4. Improved Power Quality Switched Inductor Cuk Converter for Battery Charging Application. (IEEE2018)

 

X. POWER ELECTRONICS based HIGH VOLTAGE

 

  1. Improvement of Power-Conversion Efficiency of AC–DC Boost Converter Using 1:1 Transformer. (IEEE2018)
  2. High-Efficiency High Step-Up DC-DC Converter With Dual Coupled Inductors for Grid-Connected Photovoltaic Systems. (IEEE2018)
  3. Analysis and Design of High-Efficiency Hybrid High Step-Up DC-DC Converter for Distributed PV Generation Systems (IEEE2018)
  4. High Step-Up Coupled-Inductor Cascade Boost DC-DC Converter With Lossless Passive Snubber. (IEEE2018)
  5. A Three-Winding Coupled-Inductor DC-DC Converter Topology With High Voltage Gain and Reduced Switch Stress. (IEEE2018)

 

XI. POWER ELECTRONICS based PFC AND INTERLEAVED CONVERTER

 

  1. Interleaved-Input Series-Output Ultra High Voltage Gain DC-DC Converter. (IEEE2018)
  2. Multitrack Power Factor Correction Architecture. (IEEE2018)
  3. Family of ZVT Interleaved Converters With Low Number of Components (IEEE2018)
  4. New Bridgeless Buck PFC Converter with Improved Input Current and Power Factor. (IEEE2018)
  5. A Wide-Input-Range High-Efficiency Step-down Power Factor Correction Converter Using Variable Frequency Multiplier Technique. (IEEE2018)

 

XII. POWER ELECTRONICS based SOFT SWITCHING ANG MULTIPLE OP CONVERTER

 

  1. Analysis and Design of an Input-Series Two-Transistor Forward Converter For High-Input Voltage Multiple-Output Applications. (IEEE2018)
  2. An Independently Controlled Single PWM Multiple-Output Narrow-Band Resonant Converter. (IEEE2018)
  3. A New ZVS Full-Bridge DC-DC Converter for Battery Charging With Reduced Losses Over Full-Load Range. (IEEE2018)

 

XIII. POWER ELECTRONICS based Z SOURCE AND SEPIC CONVERTER

 

  1. Isolated SEPIC DC-DC Converter With Ripple-Free Input Current and Lossless Snubber. (IEEE2018)
  2. A High-Performance Impedance Source Converter with Switched Inductor. (IEEE2018)
  3. Study on A High Voltage Gain SEPIC Based DC-DC Converter with Continuous Input Current for Sustainable Energy Applications. (IEEE2018)
  4. Single-Phase Hybrid Switched Capacitor Voltage-Doubler SEPIC PFC Rectifiers. (IEEE2018)

 

XIV. POWER ELECTRONICS based LED APPLICATIONS

  1. Loss Analysis for Efficiency Improvement of the Integrated Buck FlybackLED Driver. (IEEE2018)
  2. A PFC Single-Coupled-Inductor Multiple-Output LED Driver without Electrolytic Capacitor. (IEEE2018)